Deadbolt Installation in
Pasadena, TX

We book installations for whatever time works for you. If a door won't lock after a break-in attempt, we come.

A neighborly check: open your door, look at the strike plate and count the screws. If they're short ones in the trim, that's the weak point.

A Cracked Jamb, a High-Security Lock on the Wish List and a Stronger Fix

People often expect the lock to be the fix. What follows is a typical example of how one went instead, from a house off Strawberry Road.

A couple woke to find boot marks on their back door and a crack running up the jamb beside the deadbolt. Someone had kicked it overnight. The deadbolt had held, and the door hadn't opened, but the jamb was split and the strike was loose. They'd read online about high-security deadbolts with hardened bolts and pick-resistant cylinders and called us expecting to buy one for the back door and one for the front.

Our dispatcher, who lives a few streets over and knows the houses. Where was the damage? The jamb, not the lock. Did the deadbolt still turn smoothly? Yes. The husband unscrewed one: three-quarters of an inch, into trim. She explained that the lock had done its job and the jamb hadn't, and that a high-security deadbolt wouldn't change that. What would help was a jamb reinforcement kit, a long steel plate that spreads a kick across the frame, plus a strike held by 3-inch screws. The technician would text when he was heading over.

When the technician got there, he was in uniform and offered his ID. He checked the wife's license against the address. He glued and clamped the split jamb, then removed the old strike. He fitted the steel reinforcement plate along the jamb, set it with 3-inch screws into the framing and mounted a heavy strike within it. The deadbolt didn't throw fully on the first try; the plate's opening sat a hair high. He adjusted the plate and deepened the pocket behind it with a chisel. Full throw on the second try. He pushed hard on the locked door, and it didn't move.

He did the front door the same way and rekeyed both deadbolts to one key, since the couple worried someone had seen them use their keys. The neighborly advice: before buying a stronger lock, strengthen the wood it sits in.

Deadbolts That Actually Hold

Door Jamb Reinforcement

Door jamb reinforcement uses a steel plate along the jamb to spread a kick's force across the frame. It's the most effective upgrade after a kicked door. It's painted to match the door frame and is barely noticeable once installed.

Strike Plate With Long Screws

A strike plate with long screws, 3-inch screws into the framing. Most doors come with short screws in the trim.

High Security Deadbolt

A high security deadbolt resists picking and drilling. Against kicks, the jamb matters more. Pair one with a reinforced jamb for the best protection.

Attempted Break-In Door

An attempted break-in door often has a split jamb and a loose strike. We repair the split and reinforce it the same visit. Photograph the damage first for insurance.

Install Deadbolt Near Me on Knob-Only Doors

To install deadbolt near me on knob-only doors, we bore with a jig, fit the bolt and reinforce the strike. Back and garage entry doors are common.

Front and Back on a Single Key

New and existing deadbolts can be keyed to one key during the same visit. That's especially worthwhile if you're unsure who has copies.

Homeowners, Renters and Their Landlords

Owners book with ID and a deed or utility bill. Tenants need landlord approval. Landlords can approve by phone or email.

Jamb Kit Versus a Pricier Lock

The hardware and any jamb work.

Sliding Doors and Secondary Locks

Sliders are a common entry point. Anti-lift screws in the top track and a secondary lock, such as a bar or a foot lock, make them much harder to force. A wooden dowel in the track is a simple stopgap until proper hardware is fitted.

Hinges on Outward-Facing Doors

Doors with exposed hinge pins on the outside can be lifted off. Security hinge pins or set screws stop that without changing the door. This is most common on outward-swinging back and side doors.

Back Doors Out of Sight

Back doors facing alleys, fences or yards are kicked far more often than front doors, because nobody on the street can see. Reinforce them first. Motion lights add another layer of protection.

Garage Entry Doors Without Deadbolts

Many Pasadena homes have a knob only on the door between the garage and the house. If the garage door is opened, that knob is all that stands in the way. A deadbolt with a reinforced strike solves it.

Mobile Coverage in Pasadena

In Pasadena, the technician comes to wherever the problem is: a driveway, a doorway or a parking space. Deadbolt work is booked at a time that suits you. Neighborhoods off Strawberry Road, Burke Road and Spencer Highway are easy to reach in the morning.

Technicians Who Look Past the Lock

When the technician arrives, they're in uniform and show ID. They look at the jamb, strike and door before the lock, explain what will actually help and test every deadbolt before leaving. They'll show you the difference between the old strike screws and the new ones.

Our company is licensed and insured, and Houston-area homeowners rate Fast Locksmith 24/7 5 stars on Google.

Deadbolt Installation Around Pasadena

Deadbolt calls in Pasadena come from families after attempted break-ins, owners of older homes north of Spencer Highway with knob-only back doors, landlords securing rentals and new owners near Fairmont Parkway. Deadbolt installation in Pasadena often means reinforcing the jamb as much as changing the lock.

If you're searching to install deadbolt near me, check your strike screws first.

After a break-in attempt on a street, neighbors in Pasadena often compare notes and find the same thing: short strike screws in soft trim and jambs that split easily.

Homes near Strawberry Road, Burke Road and the streets north of Spencer Highway were mostly built with standard strikes and short screws. A few long screws and a reinforcement plate change that in one short visit.

Landlords with rentals across Pasadena add jamb kits and long-screw strikes between tenants, especially on back doors.

A good deadbolt needs a good door and frame. Before fitting, we check that the door sits square, the hinges are tight and the strike has solid wood behind it.

Choose the grade that suits the door. Basic, standard and heavy-duty bolts differ in how they resist force.

Long screws in the strike do most of the work in a forced entry. We use ones that reach the stud.

If you like, we key the new bolt to match your handle set.

Ask about a security plate around the lock edge. It is a thin steel cover that stiffens the door where kicks usually land.

Do not forget the back door and the garage entry.

After fitting, we throw the bolt, close the door and check that it moves freely without scraping.

Test the bolt again after a few weeks. New wood and hardware settle, and a small adjustment keeps it moving freely.

Think about the finish. Matte black, satin nickel and brushed brass all hold up well, and matching the handle set makes the door look finished.

We also install deadbolts in Deer Park, La Porte and Pearland. For new handle sets, see lock change, and for keypads, smart lock installation.